Infinique INO227X-AWT, User Instruction Manual

Page: 36 / 50

Infinique High Speed Dome Manual
36
OPERATION & PROGRAMMING
DOME : GENERAL SETUP
BACK UP TASK
OFF When the event(alarm action) is occurred,
preset, tour, pattern and scan are operated.
ON (default) : When the event (alarm action ) is occurred,
the camera moves to object with detected zone
even if the camera already set preset, tour,
pattern and scan.
TURBO SPEED
This setting defines the speed of pan and tilt.
The following settings are available:
OFF (default) : Max. speed is 90 degrees per second.
ON : Max. speed is 180 degrees per second.
Note
- Turbo speed is only applicable for manual operation not for
preset, pattern , etc .
PRESET SPEED
You can optimize preset speed in this menu.
There are three options:
Fast
Normal
Low
SELF TEST
This setting defines the diagnostic monitoring activity.
When the dome finds some problems, the error message is displayed.
For details, see <SYSTEM→EVENT LOG> section in this manual.
The following settings are available:
OFF(default) : Disable s self test
ON : Enable s self test