Chapter 2 - Features set
User Manual
R5000 series - Web GUI
8
Wireless Links Statistics - displays the main parameters of all wireless
connections between the device and the neighbor devices
Switch Statistics - displays counters of the frames which have been switched
(e.g. the number of dropped packets and if they are dropped because of the
flood into their reachable destination, because of the STP, because of the
firewall, etc).
2.3.1. Interface Statistics
Parameter
Description
Interface
Displays all physical and logical set interfaces
MAC
Address
Displays the MAC address of each interface
Status
Displays for each interface whether it is
“up and running” or
not
Mode
Displays the operation mode of each interface. E.g.:
-
10,100 or 1000 Mbps and half or full duplex for the
Ethernet interface
-
Bitrate, frequency and bandwidth for the Radio interface
-
Switch Group number for the SVI
Packets
Displays the number of received and transmitted packets for
each interface since the unit is operational. The local system
packets are counted, too (and not only the ones that are
passing through the switching groups - data traffic)
Errors
Displays the number of received and transmitted error
packets for each interface since the unit is operational
Load
Displays the packet flow through each interface in real-time
(for the system and the data traffic)
Table 1 - Interface Statistics
All these counters can be reset by pressing the «Reset All Counters» button:
