Hardware Manual XE166 Low End Easy Kit Board V1.5
General Information about XE166 Easy Kit Board
Hardware Manual
6
V1.5, 2011-03
2
General Information about XE166 Easy Kit Board
2.1
Summary of Features
– Infineon’s XE166 Controller in LQFP-64, VQFN-48 and TSSOP-38 Package
– High Speed CAN Transceiver, LIN Transceiver, USB to UART/JTAG bridge
– 8 Low Power Status LEDs
– Easy access to all pins
– 4-DIP switches for configuration
– On board USB to JTAG/UART interface
– Powered via USB
Connectors
The XE166 Board offers a wide variety of connectors:
– USB connector for ASC/ JTAG/ SPD Interface
– 4-pin header for LIN Transceiver
– 16-pin header for JTAG interface (OCDS)
– 10-pin (2x5) header for CAN High Speed Transceiver (CAN0)
– 10-pin header for DAP/ SPD interface
Components
– Low-Drop Voltage Regulator TLE 4274
– Four status LED´s for Power/RESET/JTAG
– CAN-Transceiver TLE 6251DS
– LIN Transceiver TLE 7259
– FT2232HL Dual USB to UART/JTAG interface
– SPI EEPROM 128 Kbit AT25128N
1)
– 8 general purpose LEDs
– Potentiometer for ADC
– Reset switch
Zero Ohm Bridges
– Zero Ohm resistors give the flexibility to configure the systems functionality
1) The soldered part may differ from the schematic, for example Atmel 25040AN.
