XC164CM
XC164CM Board
Features of the XC164CM series Easy Kit Board
XC164CM series Board Manual
6
V 1.0, 2006-01
2
Features of the XC164CM series Easy Kit Board
The XC164CM series Easy Kit is soldert with the XC164CM-8F device. This device fit
into all members of this product family so that there are no special Easy Kit Boards
necessary.
2.1
Summary of Features
– Infineon’s XC164CM Controller in TQFP64 Package
– On-board dual voltage power supply provides 5V/2.6V to XC164CM
– High Speed CAN Transceivers, LIN Transceiver, UART(RS232)
– 8 Low Power Status LEDs
– Easy access to all pins
Connectors
The XC164CM Board offers a wide variety of connectors:
– SUB-D9 connector for ASC0 Interface via RS 232 port
– 4 pin header for LIN Transceiver (ASC1)
– 16-pin header for JTAG interface (OCDS)
– SUB-D9 connector for CAN High Speed Transceiver (CAN1)
– 10pin (2x5) Header for CAN High Speed Transceiver (CAN2)
– Easy access to all pins
Components
– Dual Low-Drop Voltage Regulator TLE 7469 to supply 5V/2.6V
– Two LEDs to validate power supply (5Volt / 2.6Volt)
– LED indicating /RSTIN active state
– 2 x CAN-Transceiver TLE 6250
– LIN Transceiver TLE 7259
– 8 general purpose LEDs
– Reset switch
Zero Ohm Bridges
– Zero Ohm resistors give the flexibility to configure the systems functionality
