Infineon TLS8 2ELV Series, Manual, Page: 8 / 17

2.2.3 Jumper settings TLS835B2ELVSE and TLS820B2ELVSE
Headers X9 (selectable output voltage)
The output voltage can be configured by X9.
Table 7 Header X9 options for selectable output voltage
X9 Function
SEL
↔
VOUT VOUT is configured to be 5 V
6)
SEL
↔
GND VOUT is configured to be 3.3 V
Headers X10, X11 and X12
These headers are not relevant. They can be set to open or as shown in
Figure 4
Default setting of the jumpers TLS835B2ELVSE and TLS820B2ELVSE
Figure 4 shows the default setting of the jumpers of TLS835B2ELVSE and TLS820B2EVLSE demoboards.
Figure 4 TLS835B2ELVSE and TLS820B2ELVSE default jumper configuration
6
Default setting
TLS8xxx2ELVxx Demoboard
Z8F61720705
Demoboard
Application Note 8 Rev. 1.0
2018-05-15