User Manual
10 of 21
Rev. 1.0
2019-01-30
TLE986x EvalBoard User Manual
Communication interfaces
5
Communication interfaces
5.1
LIN (via banana jack and uIO BSL)
The device integrated LIN transceiver is connected to a banana jack and additionally to the uIO BSL interface.
To integrate the device in a LIN network it is sufficient to use the single wire banana interface. The BSL interface
is intended to program the device via LIN. For further information about the uIO interface see
www.hitex.com/uio
.
5.2
UART
A RS232 connector on the board enables a serial communication.
5.3
Debugging
Debugging is possible via the SWD interface; the signals are routed through the 10 pin header SWD interface
(see
Figure 4
).