User Manual BMS Demo Kit
10
Rev. 1.0
2020-06-04
User Manual Demo Kit TLE9012AQU & TLE9015QU
Terminal
2
Terminal
A terminal program (e.g. TeraTerm) can be used to communicate with the BMS IC. The configuration of the
serial port is shown in
.
Figure 13 Serial port setup
After successful configuration, a user manual is available by sending “?”.
Figure 14 User
manual
There is the possibility to load a script into the terminal, which will perform several lines of commands. Drag
& drop can be used to load the script in the terminal. A script, which reads out all the cell voltage is provided
on the USB stick “TC265TFT_BMS_init_CVM_1_Slave_Terminal.txt”.