User Manual
8 of 14
Rev.1.00
2020-12-03
TLD2252-2EP rear combination lamp evaluation board
User Manual
Schematics, layout and bill of material
3
Schematics, layout and bill of material
For the calculation of the external components required for the
LITIX™ Basic+ TLD2252
-2EP and used on the
TLD2252-2_RCL_EVAL board refer to the following documentation:
•
•
LITIX™ Basic+ LED driver family: How to implement a rear combination lamp
•
D driver family: Diagnosis and fault management
3.1
Schematics
In Figure 5, the top-level schematic of the TLD2252-2_RCL_EVAL board is shown. Figure 6, Figure 7 and Figure 8
show the schematic of the power supply circuit, the TLD2252-2EP and the on-board LED load respectively.
Figure 5
Schematic of TLD2252-2_RCL_EVAL board
–
top level
