Kit Content
TDA7210V Remote Control Rx-Board
Design Example by Mipot S.p.A.
Dear Customer,
Thank you for working with Infineon Wireless Control products!
This TDA7210V Remote Control Receiver-Board represents a typical design example
how the TDA7210V can be used as a receiving component in a remote control
application. On the side of the TDA7210V there is a microcontroller decoding the
received signal and driving the five output channels. This design is fully compatible to
Infineon’s PMAfob remote control transmitter (see
www.infineon.com/PMAfob
).
All design information is available for download on the Infineon internet pages
(see
www.infineon.com/TDA7210V
):
Schematic
PCB layout
Components list
Microcontroller firmware (C source code)
The TDA7210V Remote Control Rx-Board was designed by one of Infineon’s
recommended design houses for Wireless Control products:
Mipot S.p.A. (
www.mipot.com
)
For further support please contact your local Infineon Distributor, your responsible
Infineon Sales Office, contact us directly at
or call us
at
0(0)800 951 951 951.
This is an international toll free phone number. In case this
service is not supported in your country, you can find a complete list of Infineon
service phone numbers at
www.infineon.com/customercarecenter
.
Please, don’t forget to take notice of the legal disclaimer sheet.
We wish your development work using Infineon’s Wireless Control products will be
successful.
Your Infineon Wireless Control Team
www.infineon.com/TDA7210V www.infineon.com/PMAfob
TDA7210V Remote Control Rx-Board
PMAfob Remote Control Transmitter
1 antenna, ¼ lambda - reduced size
Legal disclaimer sheet
Firmware source code and Hardware
design documentation available
for download at
www.infineon.com/TDA7210V
TDA7210V_RC_RxBoard_vx.y.zip
Other available PMAfob demos:
PMAfob RKE demonstrator
PMAfob Home Automation
demonstrator
September 2010
Read Me First
