Infineon OPTIREG TLS820D2ELVSE, Manual, Page: 6 / 17

2.2.1 Jumper settings for all variants
Header X7 (Input capacitor C1)
A capacitor C1 of 47 µF can be connected to VIN by placing a jumper on X7.
Header X8 (Enable function)
EN input pin can be configured by X8.
Table 3 Header X8 options for Enable function
X8 Function
EN
↔
VIN The regulator is enabled while the EN pin is connected to VIN
EN
↔
GND The regulator is disabled while the EN pin is connected to GND
open The EN input pin is supplied from the EN banana jack connector
5)
5
Without supplying a signal to EN, the regulator is disabled due to the internal pull-down resistor.
OPTIREG
™
linear voltage regulator TLS8xxx2ELVxx demoboard
Z8F61720705
Demoboard
User manual 6 Rev. 1.1
2021-06-24