Infineon OPTIREG TLS412 D0EPV Series, User Manual, Page: 15 / 27

2.3.6 Signal adaption
For easy signal adaption, for example connecting probes of an oscilloscope, the PCB offers test points. The
TP_... label of each test point indicates the probed signal. For further information on the mapping between test
points and signals see Schematic . The GND clip of the probe can be attached to the ground clamp as shown in
Figure 12 .
Figure 12 Test point and GND clamp example
OPTIREG
™
switcher TLS412xD0EPVxx demoboard
Z8F68163134
Demoboard
User manual 15 Rev. 1.1
2020-06-30