TM
3 of 15
iMOTION2go
Starter kit for iMOTION
TM
ecosystem application note
Safety precautions
1
Safety precautions
Please note the following warnings regarding hazards associated with development systems.
Table 1
Precautions
Caution: The iMOTION2GO system contains parts and assemblies sensitive to
electrostatic discharge (ESD). Electrostatic control precautions are required when
installing, testing, servicing or repairing the assembly. Component damage may result
if ESD control procedures are not followed. If you are not familiar with electrostatic
control procedures, refer to the applicable ESD protection handbooks and guidelines.
Caution: Bad handling or application errors such as touching the motor winding wire,
clamping the motor, bending the board, supplying an incorrect or inadequate DC
supply, or excessive ambient temperatures may result in system malfunction.
Caution: The iMOTION2GO system is designed for software tools learning and
practicing. It is not a hardware design reference for a power load. Operating with any
additional load may cause board malfunction or damage.
