Infineon iMOTION EVAL-M3-TS6-665PN, User Manual, Page: 1 / 42

User Manual Please read the Important Notice and Warnings at the end of this document <Revision 1.0>
www.infineon.com
<201 9 -0 6 - 05 >
AN2017-43 EVAL-M3-TS6-665PN User Manual
EVAL-M3-TS6-665PN User Manual
iMOTION™ Modular Application Design Kit
About this document
Scope and purpose
This application note provides an overview of the evaluation board EVAL-M3-TS6-665PN including its main
features, key data, pin assignments and mechanical dimensions.
EVAL-M3-TS6-665PN is a complete evaluation board including PFC integration discrete IGBT and Gate driver for
motor drives application. In combination with control-boards equipped with the M3 30pin interface connector,
like EVAL-M3-102T and EVAL-M3-188. It features and demonstrates Infineon’s discrete technology for motor
drives.
The evaluation board EVAL-M3-TS6-665PN was developed to support customers during their first steps
designing applications with discrete IGBTs and gate drivers.
Intended audience
This user manual is intended for all technical specialists working with the EVAL-M3-TS6-665PN board.
Table of Contents
About this document ....................................................................................................................... 1
Table of Contents ........................................................................................................................... 1
1 Safety precautions ......................................................................................................... 3
2 Introduction .................................................................................................................. 4
3 Main features ................................................................................................................ 5
3.1 EVAL-M3- TS6-665PN board specifications ............................................................................................ 7
3.2 Pin assignments ...................................................................................................................................... 9
4 Getting Started with EVAL-M3-TS6-665PN ....................................................................... 11
4.1 Setting up the system ........................................................................................................................... 11
4.2 iMOTION™ development tools and software ....................................................................................... 13
4.2.1 MCEWizard setup overview .............................................................................................................. 13
4.2.2 MCEDesigner setup overview .......................................................................................................... 15
5 Hardware description of EVAL-M3-TS6-665PN .................................................................. 17
5.1 Boost PFC section using IGBT and diode ............................................................................................. 17
5.1.1 AC Voltage sensing and MCEWizard configuration ......................................................................... 18
5.1.2 Hardware Modification for AC Voltage sensing to work with IRMCF188 ........................................ 19
5.1.3 PFC External Current feedback configuration and calculation...................................................... 19
5.1.4 PFC Overcurrent protection circuit and PFC Gatekill configuration .............................................. 20
5.2 Inverter section using six discrete IGBTs and three gate drivers ........................................................ 22
5.2.1 DC-Link Voltage Measurement ........................................................................................................ 23
5.2.2 Motor External Current feedback configuration and calculation .................................................. 24
5.2.3 Inverter Overcurrent protection and Motor Gatekill configuration ............................................... 27
5.2.4 Overtemperature Hardware Protection Circuit .............................................................................. 28
5.2.5 Auxiliary power supply ..................................................................................................................... 29
5.2.6 PFC stage schematic ........................................................................................................................ 30