V 1.2
page 6 of 15
2021-07-22
IMC301/302A MCU Getting Started Guide
Getting Started
2)
In µVision® IDE open a use case code example from
https://www.infineon.com/cms/en/product/power/motor-control-ics/digital-motor-controller-
imotion/
or start a new blank project.
3)
Select “options for target” next to the “
Select T
arget” dropdown menu
as shown in Figure 6.
Figure 6
Keil µVision® IDE Options for Target
4)
Go to the “Debug” tab and select “J
-LINK/J-
TRACE Cortex” from the
drop-down menu on the right side
of the page as shown in Figure 7.