Application Note
3
<Revision 1.2>
<2017-11-09>
Manual for HybridKIT Evaluation Gate Board
HybridKIT Evaluation Gate Driver Board for 750V EDT2 IGBT
How to order Gate Driver Boards (EVAL-6ED100HPDrive-AS)
2
How to order Gate Driver Boards (EVAL-6ED100HPDrive-AS)
The evaluation gate driver board EVAL-6ED100HPDRIVE-AS, compatible for HybridPACK™ Drive 750V EDT2 IGBT
modules FSxxxR08A6P2xx, can be ordered via Infineon Sales Partners:
SAP ordering number for
EVAL-6ED100HPDRIVE-AS: SP001386654.
The shipping content include:
Gate driver board compatible to FSxxxR08A6P2xx.
Interface PCB.
Please note that the gate driver board comes without logicboard, software, cooler, DC-link capacitor, etc. The
gate driver board is equal to the gate driver board of the full inverter evaluation kit HYBRIDKIT DRIVE and also
HYBRIDKIT DRIVE SENSE. See [2] for information how to order the full inverter evaluation kit. The typical
appearance of the stand alone gate driver board is shown in Figure 1, where also the small interface PCB can be
seen. This PCB provides a 1-1 connection to the 80pin signal connector and can be used e.g. with the logic
board from the HybridKITs.
Figure 1 Typical appearance of the gate driver evaluation board EVAL-6ED100HPDRIVE-AS (SP001386654)
from side, top and bottom view.
For gate driver boards compatible to HybridPACK™ Drive modules with 1200V IGBT4 chipset FSxxxR12A6T4xx
please see [4]
