User Guide
10 of 67
002-32601 Rev. *C
2021-12-02
EZ-
PD™ PMG1 MCU prototyping kits guide
CY7110/CY7111/CY7112/CY7113
Introduction
Table 5
Power selection jumpers
Jumper shunt
position
Mode
Description
1
–
2
Operational mode
The kit is powered from the EZ-
PD™
PMG1 USB PD sink port. The
jumper should be in this position for normal kit operation.
2
–
3
Programming mode The kit is powered from the KitProg3 USB Type-C port. The jumper
should be in this position to update the EZ-
PD™
PMG1 MCU
firmware.
1.3.3
Prototyping kit pinout
EZ-
PD™
PMG1 MCU family kits have two I/O headers, J6 and J7, placed on either side of the prototyping kit.
Figure 7
CY7110 prototyping kit
–
I/O header
