Example with XMC 2Go
Notes
•
The Shield2Go form factor of the Shield2Go
evaluation board is directly compatible with the
board
•
Stack the TLV493D-A1B6 3DSense Shield2Go
board on top of the XMC 2Go as shown in the
picture
•
The additional pin on the left-top side (designated
with NC) is left floating
•
Using the
for the TLV493D-A1B6 can be
directly used
https://github.com/Infineon/XMC-for-Arduino
https://github.com/Infineon/TLV493D-A1B6-3DMagnetic-Sensor
Steps
•
Open one of the examples for the TLV493D-A1B6 from
File – Examples
and select as board
XMC1100 XMC2Go
•
Connect the stacked boards to the PC and press the
Upload
button
•
Select the related COM port from
Tools – Port
and open the serial monitor with
the set baud rate (see sketch/code with Serial.begin(<BAUDRATE>);)
9
2018-07-17
Copyright © Infineon Technologies AG 2018. All rights reserved.
Summary of Contents for 3DSense Shield2Go TLV493D-A1B6
Page 1: ...TLV493D A1B6 3DSense Shield2Go Quick Start V1 0 0 ...
Page 11: ......
