TC1784
FlexRay™ Protocol Controller (E-Ray)
User´s Manual
20-108
V1.1, 2011-05
E-Ray, V3.13
GTU Configuration Register 10 (GTUC10)
The Communication Controller accepts modifications of the register in
“DEFAULT_CONFIG” or “CONFIG” state only.
GTUC10
GTU Configuration Register 10
(00C4
H
)
Reset Value: 0002 0005
H
31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
0
MRC
0
MOC
r
rw
r
rw
Field Bits
Type Description
MOC
[13:0]
rw
Maximum Offset Correction
1)
(pOffsetCorrectionOut)
Holds the maximum permitted offset correction value to be
applied by the internal clock synchronization algorithm (absolute
value). The Communication Controller checks only the internal
offset correction value against the maximum offset correction
value. Valid values are 5 to 15266 (5
H
to 3BA2
H
) Microticks.
1) This bit can be updated in “DEFAULT_CONFIG” or “CONFIG” state only!
MRC
[26:16] rw
Maximum Rate Correction
(pRateCorrectionOut)
Holds the maximum permitted rate correction value to be applied
by the internal clock synchronization algorithm. The
communication controller checks only the internal rate correction
value against the maximum rate correction value (absolute
value). Valid values are 2 to 1923 (2
H
to 783
H
) Microticks.
0
[15:14],
[31:27]
r
Reserved
Returns 0 if read; should be written with 0.
Summary of Contents for TC1784
