Inficon Pernicka 700H CHLD, Translation Of The Original Operating Instructions

Page: 62 / 100

6 | Operation INFICON
62 / 100 Pernicka-700H-CHLD-Operating-instructions-jin76aen1-04-(1911)
► The device is factory-set for manual starting of the measurement process. To start
the measurement process manually, you can press the "Leak Test" button in the
"Mini" or "Measure" windows. See "Select the "Mini" window and start the
measurement [
}
62]" or "Select the "Measure" window and start the measurement
[ } 63]".
6.5.3 Start and perform the measurement
To start the measurement process (only when the device is prepared for manual
start), to follow the measurement and to view the results, you can choose between two
measurement windows.
• To start and run the measurement with the "Mini" window see "Select the "Mini"
window and start the measurement [
}
62]".
• To start and run the measurement with the "Measure" window see "Select the
"Measure" window and start the measurement [
}
63]".
6.5.3.1 Select the "Mini" window and start the measurement
The "Mini" window provides all settings required for the measurement process. This
window is mainly suitable for the operator of the device.
► To open the "Mini” window, press the tab "Mini".
Fig. 32: Window "Mini"
1
To start the measurement process, press the "Leak Test" button. After starting
the measurement process, the name of the "Leak Test" button changes to
"testing ...".
2
Track the measurement process using the progress bar.