INFICON
Operation | 6
HLD6000-Operating-instructions-kinb43en1-05-(2107)
57 / 90
6.9 Parameter list
It is possible to display all settings for the device. For changes the necessary
permissions are required, see "Access to the settings [
41]".
With the aid of the parameter list several changes can be carried out in one area
without navigating through various menu trees, see "Menu path [
82]".
1
> Parameter List
ð
Alternatively, select “
> Parameters > Parameter List".
2
To change individual parameters, press on an entry on the touchscreen.
3
Either confirm changes with
or reject them with the
button.
The following parameters are displayed:
• Analog output upper limit, see "Setting the upper scale value for 10 V of the
• Display off after, see "Setting the display [
• Display brightness, see "Setting the display [
36]"
• Diagram maximum value (log.), see "Setting the display [
• Diagram maximum value (lin.), see "Setting the display [
• Display upper limit (lin.), see "Setting the display [
36]"
• Display upper limit (log.), see "Setting the display [
36]"
• Display unit leakage rate, see "Setting the display [
• Auto scale, see "Setting the display [
• Bus module address, see "Setting a bus module address [
41]"
• Data record, see "Measurement data recording [
53]"
• Date, see "Setting date and time [
35]"
• Diagram of the leakage rate, see "Setting the display [
• Factor user gas 1, see "Setting up the gas for the SMART sniffer line [
46]"
• Factor user gas 2, see "Setting up the gas for the SMART sniffer line [
46]"
• Factor user gas 3, see "Setting up the gas for the SMART sniffer line [
46]"
• Error information operator, see "Setup scope of error messages [
41]"
• Error information supervisor, see "Setup scope of error messages [
41]"
• Filter change request, see "Setting the filter change request [
• Filter change interval, see "Setting the filter change request [
• Gas of R600a sniffer line, see "Verifying R290 with the sniffer line for R600a/R290
Summary of Contents for HLD6000
