Inficon HLD6000, Installation Manual

Page: 48 / 76

48
6 Operation
Tr
an
sl
ation
o
f the
o
rig
in
al
operatin
g
in
str
u
ct
io
ns
HLD
6000
, k
ina4
3
e1-
a
, 140
8
6.4.8.2 Evaluating measured data
A file with measured date is constructed as follows:
For example // Record file: \L0000001.txt

// Created by HLD6000CU V0.11.02.18681

// HLD6000CU Ser.-No.: 00000000000

// HLD6000 Ser.-No.: 00000000000

// HLD6000MB V0.22.06(1.04.00)

// Probe V1.00

// Probe Ser.-No.: HLD5000 probe

// Probe Type: SMART (R134A)

// IO1000 V0.05.00(0.02.02)

// IO1000 Ser.-No.: 00000000000

// BM1000 not connected

// Start time: 23.06.2014 08:58:25

Time Leakrate[g/a] Status

0.0 1.82E-02 MEASURE

0.5 1.82E-02 MEASURE

1.0 4.16E-03 MEASURE

1.5 1.29E-02 MEASURE

2.0 0.00E+00 MEASURE

2.5 1.02E-02 MEASURE

3.0 1.75E-03 MEASURE

3.5 3.43E-03 MEASURE

4.0 3.43E-03 MEASURE

4.5 0.00E+00 MEASURE

5.0 8.20E-03 MEASURE

5.5 1.71E-02 MEASURE

6.0 1.52E-02 MEASURE
In the example shown the data record started on 06/23/2014 at 8:58:25. From this start
time onwards a measurement result was recorded every 500 milliseconds.
1.82E-02 means 1.82 x 10
-2
as the leakage rate per year.
The following status entries are possible:
6.4.8.3 Transferring measured data from the internal memory to a USB stick
It is possible to transfer measured data on the internal memory to a connected USB stick.
1 Connect a USB stick with the USB port on the device.
2 Select " > Recorder > Copy".
3 Select the files you wish to copy.
4 Confirm your selection using .
Status entry Meaning
UNKNOWN Unknown, as, e.g., there is no communication
RUNUP Run up
STANDBY Standby
MEASURE Measuring
ERROR (xxx) Error (error number)
WARNING (xxx) Warning (warning number)
CAL Calibration