Inficon HLD6000, Installation Manual

Page: 27 / 76

5 Installation
27
Tr
an
sl
ation
o
f the
o
rig
in
al
operatin
g
in
str
u
ct
io
ns
HLD
6000
, k
ina4
3
e1-
a
, 140
8
Please refer to the COOL-Check installation instructions on how to connect or change the
COOL-Check.
5.5 Connecting to the power supply system
The device cannot be switched over for other supply voltages.
5.6 Using a USB stick
With a USB stick, you can

Record measured data, see "6.4.8.1 Recording measured data", page 47

Save settings, see "6.3.11 Save parameters", page 40 ,

Save histories,

Store measured data, see " It is possible to transfer measured data on the internal mem-
ory to a connected USB stick.", page 48 .
The USB stick must be formatted in the FAT file system.
5.7 Connecting a PC
Connection is done using the I/O module, see "10.1 Accessories and spare parts", page 67 .
Please refer to the “Interface description HLD6000” (doc. no. kins44e1-a) for further infor-
mation on data exchange.
Danger from electric shock
Improperly earthed or protected products may be dangerous to life in case of a malfunc-
tion. The use of the device is not permitted without a connected protective conductor.
►
Only use the included 3-wire power cable.
Danger due to incorrect supply voltage
Incorrect supply voltage can destroy the device and injure persons.
►
Check whether the supply voltage specified on the rating plate of the device matches
the supply voltage available on site.