Inficon ELT3000 Translation Of The Original Operating Instructions Download Page 26

Page: 26 / 74

5 | Installation

INFICON

26 / 74

ELT3000-Battery Leak-Detector-Operating-instructions-mina95en1-10-(2007)

5.3.1 Connect devices

Place the vacuum control unit (GCU) and the gas detection system (GDU) on a

non-slip, stable, shock and vibration-free surface.

Connect the GDU A connection of the gas control unit (GCU) to the GDU A

connection of the gas detection unit (GDU) with a Ø 6 mm connecting hose, also

see the following illustrations.

Connect the GDU B connection of the vacuum control unit (GCU) to the GDU B

connection of the gas detection system (GDU) with a Ø 6 mm connecting hose.

Connect the purge connection of the vacuum control unit (GCU) to the fresh air

system using a Ø 6 mm connecting hose.

Use the supplied exhaust connection nut.

Connect the Exhaust connection of the GCU to the exhaust system via the Ø 10

mm connecting hose.

Connect the Exhaust connection of the GDU to the exhaust system via the Ø 8

mm connecting hose.

Connect the vacuum control unit (GCU) to the gas detection system (GDU)

using the RS232 signal cable.

Use the enclosed angle clips to lay the hoses without kinks.

Summary of Contents for ELT3000











































































Search results

Summary of Contents for ELT3000

Reviews:

Related manuals for ELT3000

Brands by name

Popular brands

Inficon ELT3000, Translation Of The Original Operating Instructions

Search results

Summary of Contents for ELT3000

Reviews:

Related manuals for ELT3000

Brands by name

Popular brands