Inficon CU1000 Translation Of The Original Instructions Download Page 23 | Manualshive

Page: 23 / 36

Inficon CU1000 Translation Of The Original Instructions Download Page 23

INFICON

Operation CU1000 | 6

CU1000-operating-instructions-jina54en1-06-(1901)

23 / 36

• Maintenance, maintenance history

Control unit

• Version control unit: Information on the software version

• Memory: Information on available memory

• Settings: Control unit settings.

• Serial port wired: Information on the communication connection

• Data exchange: Information on the data exchange between mass spectrometer

module and the control unit

Mass spectrometer

module

• MSB (1): Information on the software version

• MSB (2): Information on operating parameters

• TMP controller (1): Information on the turbo molecular pump

• TMP controller (2): Information on the turbo molecular pump, continued

• Ion source: Information on the ion source used

• Preamplifier: Information on the preamplifier

• Preamplifier test: Information on the preamplifier test.

Interfaces

• I/O module (1): Information on the software version, inputs and outputs

• I/O module (2): Visualized information to the digital inputs

«
...
21
22
23
24
25
...
»

Summary of Contents for CU1000





































Reviews:

No comments