Inficon Contura S400 Translation Of The Original Operating Instructions Download Page 60

Page: 60 / 68

10 | Decommissioning the measuring instrument

INFICON

60 / 68

Contura® S400-Operating-instructions-jina91en1-09-(2001)

10 Decommissioning the measuring

instrument

10.1 Disposing of the device

The device can either be disposed of by the operator or be sent to the manufacturer.

The device consists of materials that can be recycled. This option should be exercised

to prevent waste and also to protect the environment.

• During disposal, observe the environmental and safety regulations of your country.

10.2 Sending in the device

WARNING

Danger due to harmful substances

Contaminated devices could endanger the health. The contamination declaration

serves to protect all persons who come into contact with the device.

► Fill in the declaration of contamination completely.

Please to get in touch with us and send a completed declaration of

contamination before sending anything to us.

You will then receive a return number from us.

Use the original packaging when returning.

Before sending the device, attach a copy of the completed contamination

declaration. See below.

Summary of Contents for Contura S400





































































Search results

Summary of Contents for Contura S400

Reviews:

Related manuals for Contura S400

Brands by name

Popular brands

Inficon Contura S400, Translation Of The Original Operating Instructions

Search results

Summary of Contents for Contura S400

Reviews:

Related manuals for Contura S400

Brands by name

Popular brands