6 | Operation
INFICON
28 / 68
Contura® S400-Operating-instructions-jina91en1-09-(2001)
6
Fill in the on-screen fields "Max. inner volume", which depends on the
measuring mode, for the information of the gas filled inner volume or the "Min.
outer volume".
7
Switch to the tab "Part 2".
8
Select the "measurement time" from the displayed time intervals.
ð
The intervals available are 5, 10, 15, or 30 seconds. A longer measurement
time improves the accuracy of the results.
9
Enter an optional name for a production batch.
10
To enter a barcode, use the touchscreen to enter or scan the bar code in the
activated input field.
11
Via "Select Image" load a product image that will be displayed on the screen
during the measurement.
If your image is not stored on the device, expand the image database. After
pressing
you can transfer images (JPG, PNG; max. 400 x 400 px) from a
USB flash drive (FAT32 format) to the image database.
12
Save
.
6.2.6.3 Create product variants
If you want to mark a partial quantity of a product, for example, a batch, you can
create a variant of the product in question. This eliminates the need to create the
same product again and to assign a measuring mode.
To create product variants, you need a product that has already been created.
ü
Operator or Supervisor rights
1
> Products
ð
Existing products are displayed as a list.
2
Press a product name and select from the toolbar
that appears.
ð
A window opens in which any variants that have already been created are
displayed in a list overview.
3
To create a new entry, press
.
4
Enter the desired name under "Variant name".
5
To enter the optional "variant barcode", use the touchscreen for input or scan
the barcode when the input field is activated.
6
Save
.
6.2.7 Changing the volume
In addition to the visual display of the measurement result a beep is sounded. You can
change the volume of the beep.
