4 of 8
PN 074-536-P1C
CMS5000 Monitoring System Concentrator Installation Instructions
5
Using a 7/16” wrench, loosen the nuts on each side of the concentrator by 1/4 of a
turn. Loosen the nut on the right side upwards and the nut on the left side
downwards. Using fingers, fully loosen both ends of the concentrator. See
.
Figure 6 Loosen the nuts
6
Using a 3/8” wrench, stabilize the concentrator elbow on the right side. Using a
screwdriver, unscrew and remove the two screws that hold the elbow in place. Retain
the screws for use when reinstalling. See
.
Figure 7 Remove two screws
