Infasecure Dino High Chair, Assembly Instructions Manual, Page: 4 / 8

3. Insert the tray at an angle of 30-45
degrees. Push down until spring clip
of the tray support sits in the correct
position [Figure 3]. (Note: To remove
tray, press clip and tilt tray upwards to
release).
Figure 3
4
A
A
Figure 2
1. Fit chair back to chair
body [Figure 1].
Figure 1
Chair back
Press when
assembling
Chair body
A
A
B
B
2. Insert short steel tube legs A into holes
marked A on chair body. Repeat for
remaining legs (B) [Figure 2].