Carrier Body
Upper Button
Lower Button
Head Support Loop
Outer Button Hole
Inner Button Hole
Shoulder Strap
Head Support
Adjustable Seat
Webbing
Shoulder Strap Adjuster
Waist Belt and Buckle
Side Closure Buckle
Carrier Body
Upper Button
Lower Button
Head Support Loop
Outer Button Hole
Inner Button Hole
Shoulder Strap
Head Support
Adjustable Seat
Webbing
Shoulder Strap Adjuster
Waist Belt and Buckle
Side Closure Buckle
5.
Carrier Body Front:
Refer to these parts when reading the instructions.
Carrier Body Back:
1.
Adjust the carrier to the Gathered Seat position. Push
both sides of the
Adjustable Seat
inward, towards the
center of the
Waist Belt
, gathering the fabric at the
bottom of the
Carrier Body
.
2.
Fasten the
Head Support Loops
around the
Upper
Buttons
.There are two button holes on each
Head
Support Loop
. For sleeping babies or babies without
head control, use the
Inner Button Hole
. For larger
babies with head control, use the
Outer Button Hole
.
3.
Hold the carrier upside down by the
Waist Belt
, with the
pattern side of the
Carrier Body
facing your body and
the
Shoulder Straps
hanging down.
1
Carrier use for an Infant:
Facing-In Position with Gathered Seat
This position is for babies 8 lbs to 15 lbs (3.6 kgs to 6.8 kgs).
* Baby MUST be carried inthe Facing-In position until baby is able to sit up on his or her own.
* We recommend having another adult assist you if this is your first time using this type of carrier.
* When using this carrier in the Facing-In position, you should fit it to the user before placing the baby in the carrier.
* Support baby securely throughout the process of putting baby in the carrier, until all the buckles and straps are
properly fastened and adjusted.
* Take extra care when fastening buckles. You will hear a ‘click’ when properly secured.
* Your baby should always be comfortable. If your baby is fussy it could be an indication that he or she is not
properly positioned. If this occurs, take your baby out immediately and adjust.
* This carrier is not intended for use in the Facing-Out position.
* NOTE: The carrier parts in bold can be found on the carrier illustrations.
6.
