Instruction Sheet
TO INSTALL BASSINET
(IF SUPLIED)
REMARK: Please assemble the bassinet according to the illustrations
as below. Please pay attention to choose the correct according to
your playard bassinet design. Remove the mattress from the playard
and put it aside.
16-1
16-3
17
18
19
16-2
16.
Insert bassinet into the playard and attach
the plastic clip on the rails.(fig.16-1)
17.
Select from the metal tubes provided,
two that have their ends reduced. Place
the tubes into the sewn pockets with
the reduced ends towards the center of
the bassinet. Place the remaining tubes
into the opposite pockets with the ends
that have a small hole facing the center of
the bassinet.
18.
Align the spring loaded button with the
hole in the opposite tube.
19.
Slide the ends of the tubes together so
that one is inserted inside the other.
Ensure that the spring loaded button
locates correctly into the hole to hold the
joined tubes together Place the mattress
into the bassinet with its padded side on
top press down firmly to ensure a snug fit.
Lift the bassinet into the top of the
playard and attach the four plastic anchor
mouldings to the lower edges of the
playard corner mouldings.(fig.16-2)
Zip up the bassinet to hang in the playard.
(fig.16-3)
