infaco A3MV2-12V, Original User Manual

Page: 17 / 32

17
Operating problems
The loop no longer forms during the tying operation
2. The wire may be bent at exit
3
: (no need to
disconnect the machine)
Simply go through the cycle empty or run the knife
only and resume the tying action.
These tasks should be carried out with the machine disconnected.
1
2
1. A piece of wire may be stuck in the wire pincher
1
:
To release it, press pin
2
in the circular orifice with your fingernail or using the supplied
pliers.
3