inFace DF-IPL, User Manual

Page: 4 / 64

Instructions
1.Please use a razor to shave the hair removal area first to keep the skin dry.
2.Connect the product to the adapter and plug it into the power socket.
3.Please wear protective goggles before using the product.
4.Long press the
ON / OFF ( Function Switch ) button to turn on.
5.Short press the ON / OFF ( Function Switch ) button to switch the hair removal energy level, please choose the appropriate level
according to your needs.
6.Short press the ice compress mode button to turn on /off the ice compress function (ice compress and light emission can be
performed simultaneously).
7.
Hold the handle, and make the lamp head be close to the skin (the flash indicator blue light is always on to indicate light can be
emitted, if the blue light is not on, adjust the position of the lamp head close to the skin until the flash indicator blue light flashes),
manually press the flash button, move the handle to remove hair.
8. The power-on defaults to manual mode. Press and hold the flash button to switch to automatic mode (in automatic mode, when
the lamp holder is close to the skin, you can continuously flash hair removal).
PS: Please do not irradiate the same part repeatedly, but irradiate every skin evenly.
9.Long press the ON / OFF ( Function Switch ) button to enter the power off protection program, wait 10 seconds to shut down.
10.After depilation, please take sun protection measures and do not touch water within 6 hours.
Reference Picture
1.Use a razor to remove the
hair from the area to be
depilated, and then keep the
skin dry and clean.
2.Plug in the power cord, find
the ON / OFF ( Function Switch )
button on the side of the
product, and long press to turn it
on. Press the ON / OFF ( Function
Switch ) button again to switch
levels; press the ice compress
button to turn on or off the ice
compress function (lighting and
ice compress can be performed
simultaneously).
4.Wear the attached
professional
protective goggles
during operation to
protect your eyes.
3.Long press the
flash button to enter
the automatic hair
removal mode, long
press again to exit
the mode.
90°
5.After the lamp head is
close to the skin, if the
blue light next to the ON /
OFF ( Function Switch )
button is always on, it
indicates that it can emit
light (if the blue light is
not on, then adjust the
position of the light to
ensure that it is close to
the skin until the blue
light flashes), at this time
you can press the flash
button for hair removal, If
the machine is in
automatic mode, it can
automatically emit light
without pressing the light
button again.
Instructions
When using in winter or when the skin is dry, pay attention to daily
skin care before and after hair removal, moisturizing and hydrating.
When in use, you need to wear protective goggles. Do not look
directly at th e fl ashing light or shine the eyes directly.
When in use, do not apply any gel-like cosmetics or liquids on the
skin, such as gel, so as not to damage the skin or damage the
instrument.
After use, pay attention to ski n moisturizing and sun protection, and
do not touch water within 6 hours.
After use, symptoms such as slight redness and itching of the ski n are
rare, but they are normal. You can wait for the skin to recover on its
own before using this product.
Tips
Q&A
The specific duration of use
varies from person to person.
Please determine the duration
of use based on your own skin
reaction.
hair growth becomes slow
the hair becomes thin and soft,
with black roots falling off
natural shrinkage of pores,
hair stops growing
three times a week,
twice a week,
half a month
/ once a month,
1-2 weeks
3-4 weeks
4-8 weeks or more
Face: 1 minute
Armpit: 1minute
Arm: 2 minutes
Bikini Line: 2 minutes
Thigh: 10 minutes
Calf: 4 minutes
The specific d ata varies from person to person.
Hair Removal Cycle
Hair Removal Advice
If you find a problem during use, please refer to the table below to
troubleshoot the abnormality. If the problem cannot be solved, please
contact after-sales service.