Akit-BASIC Stamp2SX : BASIC Stamp2SX Activity kit
l
1
1. Kit Contents
In standard package of Akit-BASIC Stamp2SX include :
1. i-Stamp board
x 1
2. AX-2SX activity board
x 1
3. CX-232 serial port cable
x 1
4. SLCD16x2 Serial LCD module
x 1
5. Uni-polar stepper motor
x 1
6. Documentation
x 1
7. CD-ROM
x 1
To run this activity kit you’ll need : DC adaptor +9Vdc 500mA or higher
(m16Vdc)
2. Kit features
2.1 i-Stamp microcontroller board
l
Work abilities are compttiable with BASIC Stamp 2SX module (BS2SX-IC)
l
50 MHz clock frequency . Operate up to 10,000 P-BASIC command/second
l
16KByte memory, separate 8 sections, 2KByte/each, erasable 100,000+ times
l
32 byte RAM with 64 byte Scratchpad RAM
l
Consumption 65mA in full operation and 200mA in sleep mode
l
Connecting to PC’s serial port for programming and debuging
l
16 I/O, freedom separeted work or set in groups from 4, 8 and 16 pins
l
30mA/30mA source/sink current. Maximum 60mA/60mA source/sink current per
8-pins groups (P0-P7/P8-P15)
l
I/O pin can drive LED (with current limit resistor) and 6V servo motor directly
l
LED power status
l
Board sizes 1.7" x 1.2"
l
Develop with BASIC Stamp Editor program
Akit-BASIC Stamp2SX
BASIC Stamp2SX / i-Stamp microcontroller Activity Kit
