C-COM Satellite Systems Inc.
Page 38 of 47
iNetVu
®
Fly-1201 User Manual
Click the “Send All” button once the correct IP address is entered.
6) Advance to the “Configuration” screen, by right clicking on the “Controls” screen,
and selecting “Configuration”.
7) Enter the
Satellite Longitude
and
Sat Offset
General Case:
1.2 Flyaway
–Receive Horizontal
Offset = 0
--Receive Vertical
Offset = 90
8) Under the
Modem
section, set according to your modem specifications:
Type:
NA / HNS / iDirect / Viasat / Comtech / Radyne / SurfBeam/ iPSTAR / Gilat / STM/
Paradise / Tachyon /Eastar (NA-is used for stand alone modem
independent satellite acquisition)
INF
(Interface): HTTP (for HNS Only)
TELNET (iDirect / Viasat / Comtech Telnet Interface)
COM (iDirect / Viasat / Comtech / Radyne / STM / Paradise
Console Interface)
SNMP (Radyne Interface)
UDP
NA (Must be selected if
NA
is the
Type
)
Rx-Pol
(Receive Polarity): H (Horizontal Receive)
V (Vertical Receive)
Tx-Pol
(Transmit Polarity): H (Horizontal Transmit)
V (Vertical Transmit)
H
(Hemisphere):
Hemisphere of Operation (East or West)
*Note:
Freq (MHz), Symb (Ksps), IP, and Password fields are
NOT
required for
Stand Alone Users (Type: NA), and may be left as is.
Freq (MHz)
:
(HNS Users Only)
Enter the Modem Frequency
The DVB Parameters (TR No., Freq, Sym,
Code Rate), and the LNB_P can be left as is.
The software will automatically set these
parameters after configuration is complete.
More detail will be explained in step 12).
