inergy Flex 1500, User Manual

Page: 2 / 55

1. When you unbox your Flex Modular
System,
PLEASE DO NOT
throw away
the packaging. It may come in handy
down the road in case of damage from
shipping or handling, or any issues
requiring a return.
2. Before stacking your Flex modules
together, remove the plastic protectors
from the large connector on the bottom
of each module and the foot protectors
from all but the bottom module. These
protectors (see right) prevent damage in
shipping and are removable to allow the
modules to stack properly.
DO NOT
attempt to stack the Flex
modules with these protectors in place.
Doing so may cause damage to the
connection points.
You can use these protectors on the
bottom module in your stack to protect
fragile surfaces, but be aware they are
designed to be removed and may fall off
on their own. If you choose to affix them
permanently to one module, be aware
that module will always need to be the
bottom module of your Flex system.
3. Next, charge your Flex Modular
System to 100% by plugging a Standard
Wall Charger (included) into the DC port
on the left side of your Flex Battery.
For more pro tips on how to keep your
battery in the best shape possible, see
the
Flex Battery
section of this manual.
For instructions on connecting multiple
Flex Batteries together, see Using
Your Flex system with Multiple Flex
Batteries.
4. 4. When your Flex Batteries are fully
charged, plug a device into each output
to make sure that nothing was damaged
in shipping and handling.
5. Keep your Flex modules connected
together as much as possible, so the
batteries remain equalized.
01
FIRST THINGS FIRST