Inepro Sales Master, Technical Manual

Page: 22 / 44

14 - Sales Master - SM001 / SM002
Function Menu
The function-menu
Functions of the VMS-1 control system
According to the machine model, the “VMS-1” function-menu is accessible for the functions, which are
valid for this model; depending on the function it is possible to modify or read programmes. The VMS-1
is programmed by means of three buttons, which are integrated in the main board. By pressing these
buttons, the function-menu can be programmed, modified, or read. To activate the function-menu, set
the included jumper on its corresponding place on the VMS-1 circuit. The display shows
F 00 . By
means of the three buttons of the circuit board, you can choose, read or change a function.
Programming the menu
1) Place the included jumper on the main board, the display will show F 00
2) By means of the Up and Down buttons scroll to the function you wish
3) Press the Function button to read or modify the selected function
4) Modify this value pressing the Up or Down button
4a) To quit the function, press the Function button
5) Remove the jumper to return to the service mode
The three buttons are; (from top to bottom)
§
The Function button, by means of which the current value is shown in the display
§
The Down button, with this button the current value is modified
§
The Up button, with this button the current value is modified
The counters
The total turnover of the machine is recorded in the “VMS-1”, By this income and expenditure is
controlledwithin a defined period.
§
To control the income, select functions F 32 to F 39 .
Function F 32 represents the smallest accepted money unit, function F 33 represents the following
accepted money unit etc., pressing the function button, the number of accepted coins will be shown in
the display.
Example
A machine accepts € 0,20 to € 2,00
Function
F 32 represents € 0,20.
Function F 35 represents € 2,00.
If € 0,05 to € 2,00 are accepted, function F 32 represents € 0,05 and function F 37 € 2,00.
§
To control the quantity of returned coins/products, select function F 42 or F 43 .
Function F 42 represents the hopper/dispenser 1
Function F 43 represents hopper/dispenser 2
Pressing the function button, the number of returned coins/products is shown in the display.
Remove the jumper to return to the user mode.
18
18
21 21
21 21
21
21
21 21
21 21
21
21