iNels iMM Client / Server, User Manual

Page: 8 / 132

1.2. Basic setting
1.2. Basic setting
Setting in this chapter need not be carried out; it serves for potential problem solution and
general assistan e in the Linux system orientation. Majority of these settings is done already in
the production but one should get familiarized with them and go back to them if a problem occurs.
- Terminate Application by holding down the left mouse button (for longer than 5 seconds) on icon .
- You are on the Linux working area now.
- The application can be restarted by icon on the desktop.
1.2.1 C hange of passwor d
a) Enter sudo passwd in terminal, and confirm by Enter.
b) You will be asked to enter the original password (default is “imm123“), and confirm by Enter.
c) Then enter a new password, confirm by Enter, repeat the new password and confirm by Enter.
d) Close the terminal with the cross in the left upper corner.
No characters display when writing a password in terminal.
1.2.2 Resolution adaptation:
The application can be run on LCD, plasma TV or PC monitor with lower resolution than
Full_HD. If the resolution does not seem to be correct Application has to be re-installed. During
the installation, Application will recognize correct resolution of the display device, and will adapt
to it. The TV image should be adjusted to „Adapt“. First of all, the client part has to be
reinstalled. If the version is Server/Client, also the server part will have to be reinstalled.
1.2.3 Installation of new version
a) Download the package with new Application version to VZ desktop.
b) Click on the downloaded package with the right mouse button, and selection the
“Extrac Here” option.
c) A new folder named “iMM" will appear on the desktop.
d) Open the folder and by double click select the “install.sh.” file.
e) Select “Run in terminal” option in the dialogue window.
f) A window with terminal will open, requesting a password. As default the password is
“imm123”. If you changed the password, enter the password you chose and confirm by
Enter.
g) Proceed by the installation instructions in the terminal.