ORS-01IC controller for sliding gate control units
Installation and operation manual
1
Safety guidelines
General guidelines
ORS-01IC receiver is factory configured to
guarantee safe installation and operation, provided
that all guidelines in this user manual and the safety
and accident prevention regulations relevant to the
application (e.g. sliding gate) are followed.
Installation and repairs must be carried out by
trained and qualified professional only.
Do not modify or change the ORS-01IC receiver in
any way. All warranty repairs must be carried out by
the manufacturer. Use genuine spare parts and
accessories only.
The operational safety of the ORS-01IC receiver
can only be guaranteed if the device is used as
intended. The limit values provided in the
specifications must not be exceeded under any
circumstances.
Additional safety regulations
Follow
the
safety
and
accident
prevention
regulations relevant for a specific application (e.g.
sliding gate) when installing, commissioning and
maintaining the control unit. In particular, observe
the following:
1. Fire safety regulations
2. Accident prevention regulations
General information on hazards and safety
measures
The following are the general guidelines for use of
INEL controllers with other devices. Follow the
guidelines when installing and operating the
devices.
Caution - Failure to take precautions may result
indamage to the control unit or property.
•
Check if all screw connections are
secure before installing the control unit and
setting the limit positions.
Danger - Failure to take precautions may
result in injury or death.
•
Follow the safety and accident prevention
regulations relevant to the application (e.g.
sliding gate).
•
ORS-01IC must be installed with the
required safety and protection devices. The
control units including crushing protection
systems with a sensor installed at the gate
(contact with the obstacle) must not cause
any injuries due to the movement of the
sliding gate.
•
For INEL devices with permanent power
connection to the controller, in addition to
fuse protection, use an isolation switch for
safe power supply disconnection (e.g. fuse
cut-off switch) for all connections.
•
Inspect the power wires and cables
regularly for damaged insulation and
conductor continuity.
•
Turn off the power supply before replacing
damaged cables.
•
Check
if
the
local
voltage
supply
parameters correspond to the device
specification.
Warning - important for the safety of
personnel:
•
do not let children play with the control
devices;
•
keep the control devices out of reach of
children;
•
observe the gate in motion at all times and
keep other people away until it is fully
opened or closed;
•
Provide training and instructions for the
users on device operation and related
risks. The operator is deemed to have
been trained if the employer, administrator
or owner of the device have instructed and
authorised the operator to operate the
device.
2
Waste disposal
Do not dispose of with household
waste. Dispose of waste in accordance
with
the
relevant
legislation.
Households play a key role in the
recycling of waste electrical and
electronic equipment. Waste sorting,
including
waste
equipment
and
batteries,
guarantees that the equipment is not disposed of
with domestic household waste but is handed to a
designated collection point for the recycling of
electrical and electronic waste.
