INELCO A/S I NSTRUCTION MANUAL
Inelco A/S
•
Haandvaerkervej 6
•
DK-9690 Fjerritslev
•
Denmark
4/12
E-mail:
info
@
weldingautomation.com.au
Connect the U LTIMA-TIG to the mai
n
s voltage stated on the
t
ype label. Use single-
phase power supplied with earth.
The ULTIMA-TIG must not operate without grinding liquid!!
The UL
T
IMA-TIG
does not
contai
n
g
ri
nding l
i
quid on del
i
very. Bef
o
re star
t
ing the
machine g
ri
nding l
i
quid
must
be appl
i
ed. T
a
ke out the dr
a
in p
lu
g ( 8) and f
it
the
enclosed liquid container (39) to the machine. Place the filler neck on to the enclosed
container. Feed the ULTIMA-TIG with the grinding liquid through the hose (29) until the
correct liquid level has been r eached (please see mar k on the i nspection cover frame
(7)). There is sufficient liquid in the grinding chamber when the diamond wheel is seen
to pump the fluid as the machine is switched on.
For saf
e
ty r
e
asons the g
r
inding l iquid must be dr
a
ined f rom the ULTIMA-TIG into a
sealed closed container during transport.
ULTIMA-TIG can be operated in locations with surrounding temperatures ranging from
-10
°
C to +40
°
C and a relative humidity up to 50% at 40
°
C and 90% at 20
°
C.
The machine has been tested in accordance to protection class IP21.
4. Operational elements
•
Current and main switch
•
Carry handles
•
Degree scale
•
Electrode holder
•
Stick-out adjustment
•
Grinding fluid container 250 ml
•
Micrometer screw to flatten the tip of the electrode
5. Safety procedures
•
Never use the product if the grinding wheel is damaged
•
Use only grinding wheels recommended by Inelco A/S
•
Only use the product when all parts have been assembled
6. Fastening of the electrode in the electrode holder
Place the electrode clamp fitting the di
a
meter of the tung
s
ten
electrode i
n
to the
electrode holder. Push the electrode through the electrode clamp and into the electrode
holder. Use y our fingers to tig hten the electrode lig
h
tly, please ensure that it may still
be able to slide in the electrode holder. The electrode must be extended approx. 2 cm
from the clamp. Then place the el ectrode and the hol
d
er into the sti
c
k-out setting(10)
placed below on the right front side until it stops and tighten the electrode with a
