17
4.
Check that the motor does not start once power is restored. If it does, do not use the unit
and contact your local dealer.
Test 2:
1.
Turn on the unit by pressing the green button marked “I”.
2.
Carefully open the grinding wheel cover, making sure not to touch any moving parts.
3.
Check that the power to the motor is cut off. If not, do not use the unit and contact your
local dealer.
Cleaning & storage
CAUTION
Disconnect the unit from the power source before cleaning or maintenance.
Keep the unit clean.
Clean the unit periodically blowing with compressed air at low pressure. While doing this, remember
about the safety precautions, including protecting your eyes from being sprinkled with filings.
Clean the housing with a damp cloth with a mild detergent. Leave the cleaned unit to dry completely
before using it again. Be careful - not to let water get inside the unit to be cleaned.
Do not use aggressive cleaning agents, including solvents and abrasive agents.
Keep the unit out of reach of children.
Use the original packaging or replacement packaging for storage.
Store the unit in a dry place.
Repairs & claims
If you experience any faults on the unit, please contact your local dealer for advice or repair.
For warranty repairs please hide receipt from your purchase and serial numbers on type label attached
under the bottom of the unit and inform this to your local dealer or manufacturer directly.
The repair of the grinding unit and replacement of the damaged power cord should be entrusted to an
authorized dealer or manufacturer’s service.
