P.2
of
2
To use TARE Function
Turn on the scale. Place the empty container on the weighing platform. Press the
“TARE” button. Place the items to be weighed into the container. The exact weight of
the items will show.
To add the weight value
Press “TARE” to zero the value of the last weighing item before adding the next item
being weighed. You can repeat this procedure as according to how many items you
have.
Note : The scale will give signal “Beep, beep, beep” to represent negative (-ve)
readings when using TARE function.
Auto Power Down
The scale turns off automatically after idle for about 60 seconds.
Switching on/off the talking function
Use the switch on the bottom of the scale to switch on/off the speaker function.
Precautions
1.
Do not clean the unit with an abrasive or corrosive compound. It may scratch the
plastic and corrode the electronic circuitry.
2.
Do not overload the scale. Not to place anything that weighs more than 3000g on
the platform, or it will damage the weighing sensor and void the warranty.
3.
Do not subject the unit to excessive force, shock, dust, temperature, direct
sunlight, heavy rain or humidity. These may result in malfunction, shorter
electronic life span, battery damage or distorted parts.
4.
Do not tamper with the units internal components. It will invalidate the warranty
on the unit and may cause unnecessary battery damage, distorted parts or
personal injury.
5.
Place product on flat stable surface before use.