Ref.
017001001200
Rev.0: 06-04-20
14
4.
Software interface
Industrial Shields PLC are programmed using Arduino IDE, which is a software based on the C
language. They can also be programmed using directly C but it is much easier working with
Arduino IDE as it provides lots of libraries that helps in the programming.
Furthermore Industrial Shields provides boards for programming the PLCs much easier.
Basically it is no needed to define the pins and if that pins are inputs or outputs. Everything is
set up automatically if using the boards.
In order to install Industrial Shields boards, these are the steps that must be followed.
Requirements:
Arduino IDE 1.8.0 or above (better to have always the latest version).
Steps:
1.
Open Arduino IDE and go to: “File -> Preferences” located in the top left corner.
2.
In Additional Boards URLs write the following:
http://apps.industrialshields.com/main/arduino/boards/package_industrialshields_index.json
3.
Press OK to save the changes.
Summary of Contents for 017001001200
