Getting Started
����
12247 W. Fairview Ave, Milwaukee, WI 53226 · Phone (414) 453-5300 ·Toll Free (800) 236-1080
Rev A 6/13/2018
The following parameters can be customized to provide the optimal wrap cycle:
Playback Cycle
The playback cycle allows the operator to manually record a wrap cycle for it to be used in the future. The
carriage height and travel can be controlled, as well as the rotation of the turntable. Up to 99 steps can
be recorded on a single cycle, making it flexible for just about any situation.
To record a cycle, press
and then push
. Then the following buttons can be used to control the
wrap cycle:
. Once the desired wrap cycle has been completed press
and then push
to save it into the desired recorded program slot. This recorded program can then be accessed just
like any other wrap cycle.
Manual Mode
In instances where the machine needs to be operated manually, the operator can control the machine.
To operate the machine manually, toggle into manual mode by pressing
. The carriage can be raised
and lowered by pressing
and
. The turntable can also be operated by pressing
, if held in
for 3 seconds the turntable will keep turning on its own.
Bottom Wraps:
Number of times
the bottom of the pallet is
wrapped.
Top Wraps:
Number of times the
top of the pallet is wrapped
Tension:
How tightly the film is
applied to the pallet.
Rotation:
How fast the turntable
rotates
Up Speed:
How quickly the carriage
raises.
Down Speed:
How quickly the
carriage lowers.
5717 Salmen Street New Orleans, LA 70123
www.industrialproducts.com
