POWER ON Function
KB Power ON Password
The system will ask for a password, after entering the correct password the keyboard can then be
used.
Hot Key Power ON
Awaken the system by pressing the hot key button. The choices are “Ctrl-F1”, “Ctrl-F2”, “Ctrl-F3”
to “Ctrl-F8”.
Onboard Serial Port 1/2
The settings are “3F8/IRQ4”, “2F8/IRQ3”, “3E8/IRQ4”, “2E8/IRQ3”, and “Disabled” for the
on-board serial connector.
PWRON After PWR-Fail
This item allows you to select if you want to power on the system after power failure. The choice:
Off, On, Former-Sts.
3.3.4.3 SuperIO Device
Chapter
3
:
BIOS Setup
IM
M
-A
21[Px]S
User Manual
24