Web application
PROmesh P20 - User Manual
24
3.5.1 Basic setting
The Basic Settings page allows you to assign the device a unique device name, an installation location and
a contact person (see Figure ).
Device name: This name corresponds to the PROFINET name and is assigned via DCP.
Location: Enter the device's location of installation to make localisation easier.
Contact
:
Enter a contact person for this device.
The input boxes are configured in such a way that up to 50 characters can be entered. Using special
symbols is permitted. Device name and location are displayed in the information bar at the top right and
help you assign the web interface to a device.
Figure 9: Basic settings of the
PROmesh P20
3.5.2 Network settings
The IP can be configured (see Figure ) either by the PROFINET controller via the Dynamic Configuration
Protocol (DCP), automatically using the Dynamic Host Configuration Protocol (DHCP) or by manual
settings. Depending on the settings of the DHCP servers, the IP address can change with the automatic
address assignment after a device restart.
On an existing PROFINET connection, no automatic or manual IP configuration is possible.
PROFINET
If the device is configured in a PROFINET network, the device receives its IP configuration from the
PROFINET controller via the DCP protocol.