Device ports and status indicators
PROmesh P20 - User Manual
10
Installation
The PROmesh P20 has been designed for individual use in different kinds of control cabinets and can therefore
be mounted on a standard 35 mm DIN top-hat rail, in positions with 0°, 90° and 180° rotation.
Use only the provided DIN-rail fasteners to mount the device, or, if necessary, purchase appropriate spare parts
to mount the device in your system in such a way that it has adequate electrical contact and can withstand the
mechanical stress.
2.2 Installation instructions
The
PROmesh P20
is installed horizontally inside the control cabinet on a 35 mm top-hat rail in accordance
with DIN EN 60715.
Figure 3: Side view, with connection terminal on the right
The following distances must be maintained from other modules for correct installation:
From left and right: 20 mm
From top and bottom: 50 mm
Installation and removal of the device is displayed in Fig. 4.
