Web application
PROmesh P20 - User Manual
27
The Download button creates a log file with all entries of the table and saves them in the download
directory of the browser. The messages are written line-by-line into a file, with the lines separated
by commas.
The Delete button for the log files removes all entries from the table and shows all messages that
occur after this time point. The first log entry that appears after the entries have been deleted shows
the timestamp of the deletion.
Figure 10: Log messages
3.5.5 SSH HTTP setting
Secure Shell or SSH provides a simple option for establishing an encrypted connection with another device.
In this menu, you can activate or deactivate the service. The Hypertext Transfer Protocol (HTTP) and
Hypertext Transfer Protocol Secure (
HTTPS
) are communication protocols in the World Wide Web.
Contrary to HTTP,
HTTPS offers advanced security mechanisms
. In this menu, you
can activate or deactivate the protocols. The default port for HTTP is port 80. You can
change this here, if necessary. Keep in mind that, in the browser bar, the new port has to
be entered after the IP address of the switch, with a colon separating them. Thus you can
continue to access the web interface (e.g. 192.168.1.254:85). If you want to use HTTPS,
write
https://
in front of the IP address of the switch in the browser bar.
3.5.6 Diagnostic test
Ping
In this menu, you can send pings from your switch to other devices in your network. Thus you can make
sure that the devices are available and can measure the time delay that occurs when the packages are
transmitted. Now enter the
IP address
of the device for which you want to check the connection with the
PROmesh P20
.
