Indmar Premium 400, Operator'S Manual, Page: 82 / 124

7-26
SECTION SEVEN
OTE: N Once you have established the appropriate fluid level,
it may be beneficial to let the transmission cool down
(preferably overnight) and all of the fluid drain back. Pull
the dipstick and wipe it off. Reinstall the dipstick, but do
not thread it in. Remove the dipstick and mark a “Full Cold”
level on the dipstick for ease of checking in the future. This
level may be above the full mark on the dipstick.
Checking Oil – V-drive Portion – Yellow Dipstick
1. Remove the dipstick and wipe it clean.
2. Reinstall the dipstick, but do not thread it in.
3. Remove the dipstick and check the oil level. It should be
between the two marks on the dipstick.
4. Adjust the fluid level as required.
NOTICE
Do not overfill the transmission. Overfilling can damage the
transmission. Damage to your transmission due to too much or too
little fluid is not covered by your warranty.
TRANSMISSION MODEL CAPACITY FLUID TYPE
Indmar V –
2.3 qt (2.18 L)
Main Gearbox
Indmar ATF 872020
1.25 qt (1.18 L)
V-Drive Unit Indmar Synthetic 50
Transmission Oil 872022
Indmar In-Line – 2.3 qt (2.18 L) Indmar ATF 872020