INDIWORK A-LINK HD NTG5.5, Instruction Manual, Page: 4 / 25

Precautions
A-LINK for NTG55 - related
You should check the names and colors of each wires exactly, before you connect the wires.
ex) CAN HIGH: White wires / CAN LOW: Blue wires
The ‘POWER / CAN Cable’ should always be connected last and be disconnected first.
When the reverse gear is not detected by CAN-BUS,
the 'REVERSE 12V IN wire’ should be spliced with 12V power of reverse light.
● This product is assistive devices that help the driving safely. Do not drive by rely solely on
● The rated voltage of this product is DC 12. And it requires the correct wiring connections and mounting.
Please install only by a qualified technician.
● GPS Satellite reception may be unstable in a particular area or some vehicles that have the
special tinted windows and electromagnetic interference.
● Please read the manual prudently before using this product. And then use this product correctly.
● To avoid any risk of electric shock or other injuries, please never disassemble and reassemble this product.
● This product yourself Installing or servicing this product and its connecting cables may
expose you to the risk of electric shock or other hazards, and can cause damage to this product.
● Do not cut the GPS antenna cable to shorten it or use an extension to make it longer.
Altering the antenna cable could result in a short circuit or malfunction.
● Any function that requires your prolonged attention should only be performed after coming to
a complete stop. Always stop the vehicle in a safe location before performing these functions.
● Company can not be held responsible for incidental damages of the driver caused as a result of using the product.