Indian Motorcycle SCOUT BOBBER 2021, Owner'S Manual

Page: 45 / 162

PPRREE--RRIIDDEE IINNSSPPEECCTTIIOONNSS
OOVVEERRVVIIEEW W
To keep your motorcycle in safe operating condition, always
perform the recommended pre-ride inspections before each ride.
This is especially important before making a long trip and when
removing the motorcycle from storage.
WARNING
Failure to perform the recommended pre-ride inspections could
result in component failure while riding, which could result in
serious injury or death. Always perform the preride inspections
before each ride. When inspection reveals the need for
adjustment, replacement or repair, perform the service promptly,
or see your authorized INDIAN MOTORCYCLE dealer or other
qualified dealer for service.
WARNING
Read the entire Instruments, Features and Controls section of this
manual before riding your motorcycle. A complete
understanding of the features and capabilities of your motorcycle
is essential to its safe operation. Anything less may result in
serious injury or death.
You must be familiar with all instruments and controls to perform
the pre-ride inspections.
NOTICE
During the pre-ride inspections you may use products that are
potentially hazardous, such as oil or brake fluid. When using any
of these products, always follow the instructions and warnings on
the product packaging.
When inspections reveal the need for adjustment, replacement or
repair:
• refer to the maintenance section of this manual
• refer to the INDIAN MOTORCYCLE Service Manual
• or see your authorized INDIAN MOTORCYCLE dealer or other
qualified dealer
EELLEECCTTRRIICCAALL IINNSSPPEECCTTIIOONNSS
Turn the ignition key to the ON position and move the stop/run
switch to RUN before performing the following electrical
inspections. Return the ignition key to the OFF position after
completing these inspections. If inspection of any electrical item
reveals component failure, repair or replace the component before
operating the motorcycle.
43
PRE-RIDE INSPECTIONS